Edit product

Meso-American Set #2 - Tabards, Macuahuitl, and Daggers

$12
0 ratings

These are a set of 33 Meso-American themed components for use with various power armored models for tabletop wargames.

There are STL files for:

8 Tabards

1 Sprue of Feathers

2 Obsidian Dagger Blade Up - Left and Right hand versions.

2 Obsidian Dagger Blade Down - Left and Right hand versions.

4 Power Macuahuitl 01 - 2 versions, each with a left and right hand.

4 Power Macuahuitl 02 - 2 versions, each with a left and right hand.

4 Power Macuahuitl 03 - 2 versions, each with a left and right hand.

4 Power Macuahuitl - Double Handed 01 - 2 versions, each with a left and right hand.

4 Power Macuahuitl - Double Handed 02 - 2 versions, each with a left and right hand.


NOTE: Given the large variety of leg positions you will need to do some conversion work to make them fit your model properly, most common is to remove the "belt buckle" on the models.

I would recommend printing these with a resin printer. You can print them with an FDM printer, but the result won't be as good as with a resin printer.

RECOMMENDATION: When you remove the models from the supports, try to warm up the models (you can use a hairdryer) so the support material is softer and less brittle



$12

Meso-American Set #2 - Tabards, Macuahuitl, and Daggers

These are a set of 33 Meso-American themed components for use with various power armored models for tabletop wargames.

There are STL files for:

8 Tabards

1 Sprue of Feathers

2 Obsidian Dagger Blade Up - Left and Right hand versions.

2 Obsidian Dagger Blade Down - Left and Right hand versions.

4 Power Macuahuitl 01 - 2 versions, each with a left and right hand.

4 Power Macuahuitl 02 - 2 versions, each with a left and right hand.

4 Power Macuahuitl 03 - 2 versions, each with a left and right hand.

4 Power Macuahuitl - Double Handed 01 - 2 versions, each with a left and right hand.

4 Power Macuahuitl - Double Handed 02 - 2 versions, each with a left and right hand.


NOTE: Given the large variety of leg positions you will need to do some conversion work to make them fit your model properly, most common is to remove the "belt buckle" on the models.

I would recommend printing these with a resin printer. You can print them with an FDM printer, but the result won't be as good as with a resin printer.

RECOMMENDATION: When you remove the models from the supports, try to warm up the models (you can use a hairdryer) so the support material is softer and less brittle



  • A ZIP file of STL files for this Kit.

  • Size
    152 MB
  • A ZIP file of STL files for this Kit.
  • Size152 MB
Powered by

Checkout

Meso-American Set #2 - Tabards, Macuahuitl, and Daggers

Enter your info to complete your purchase

Give as a gift

Card

or pay with
pp paypal
You'll be charged US$12.